Stitched
I also tried with some 3D objects - stacked.
Low CA, good corners on FF but could probably do better with a lens with a larger aperture, this is f9.
Best regards
Jörgen Hellberg
Apo Gerogon 150 mm with Apo Ronar 360mm as tube lens
Moderators: rjlittlefield, ChrisR, Chris S., Pau
Apo Gerogon 150 mm with Apo Ronar 360mm as tube lens
Wanted to do use the x/y table on the microscope so I tried my normal tube lens Apo Gerogon 150 mm with an Apo Ronar 360mm as tube lens.
Stitched
I also tried with some 3D objects - stacked.
Low CA, good corners on FF but could probably do better with a lens with a larger aperture, this is f9.
Best regards
Jörgen Hellberg
Stitched
I also tried with some 3D objects - stacked.
Low CA, good corners on FF but could probably do better with a lens with a larger aperture, this is f9.
Best regards
Jörgen Hellberg
Jörgen Hellberg, my webbsite www.hellberg.photo
-
RobertOToole
- Posts: 2627
- Joined: Thu Jan 17, 2013 9:34 pm
- Location: United States
- Contact:
Nice results Jörgen!
The first question that comes to mind is, how did you manage to mount that massive lens, I saw an image years ago of someone using that 360mm lens for macro and the entire rig was over 3 feet in length, sorry over a meter long and the lens was wider than the photographers hand
Robert
The first question that comes to mind is, how did you manage to mount that massive lens, I saw an image years ago of someone using that 360mm lens for macro and the entire rig was over 3 feet in length, sorry over a meter long and the lens was wider than the photographers hand
Robert