I'm very happy with my FO LED light, but there are situations when I have to use the flash. Main problem - light modeling .
Possible solution (quick test setup), which worked great (except white balance, no surprise, new COB LED's are coming)
Initial positioning and light modeling is performed with LED's, stacking (with LED's up) - with flash.
LED modeling light for speedlight
Moderators: rjlittlefield, ChrisR, Chris S., Pau
LED modeling light for speedlight
Saul
μ-stuff
μ-stuff
-
- Posts: 684
- Joined: Thu Dec 16, 2010 2:49 pm
- Location: Barcelona, more or less
Exactlysoldevilla wrote:When I used flashes, I attached the LED modeling light in front of the flash with a small Neodymium magnet glued to the front of the flash
Got the needed parts already, but did not attached yet ... Will do with COB square LED ,which is still traveling from China
https://www.ebay.com/itm/94X50MM-Blue-D ... VbgSWGgwhg
Saul
μ-stuff
μ-stuff