Adapter M52x075 -> M42x1

Have questions about the equipment used for macro- or micro- photography? Post those questions in this forum.

Moderators: rjlittlefield, ChrisR, Chris S., Pau

lothman
Posts: 951
Joined: Sat Feb 14, 2009 7:00 am
Location: Stuttgart/Germany

Adapter M52x075 -> M42x1

Post by lothman »

Is there an adapter available adapting a 52mm filter to M42 thread?

lonepal
Posts: 322
Joined: Sat Jan 28, 2017 12:26 pm
Location: Turkey

Post by lonepal »

Regards.
Omer

lothman
Posts: 951
Joined: Sat Feb 14, 2009 7:00 am
Location: Stuttgart/Germany

Post by lothman »

thanks but that is a reverse adapter, I would need an additional female female 52 tube in order to screw in a 52 filter

RobertOToole
Posts: 2627
Joined: Thu Jan 17, 2013 9:34 pm
Location: United States
Contact:

Re: Adapter M52x075 -> M42x1

Post by RobertOToole »

lothman wrote:Is there an adapter available adapting a 52mm filter to M42 thread?
Hi Lothman,

Not sure if this would help but Raf camera made these for me for the same purpose, but to mount a tube lens! I use the same type of adapter now and they are very useful to have.

Image

(There is a typo in the listing, the thread is M52 x 0.75.)

Robert

ChrisR
Site Admin
Posts: 8662
Joined: Sat Mar 14, 2009 3:58 am
Location: Near London, UK

Post by ChrisR »

Chris R

rjlittlefield
Site Admin
Posts: 23543
Joined: Tue Aug 01, 2006 8:34 am
Location: Richland, Washington State, USA
Contact:

Re: Adapter M52x075 -> M42x1

Post by rjlittlefield »

lothman wrote:Is there an adapter available adapting a 52mm filter to M42 thread?
Relevant?

https://www.ebay.com/itm/M42-x1-to-M52- ... 2624705596

Also https://www.amazon.com/Gadget-Place-42m ... B01F6XZ7F8, though the last time I ordered one of those, the machining was not so good -- right pitch but depth visibly off.

--Rik

lothman
Posts: 951
Joined: Sat Feb 14, 2009 7:00 am
Location: Stuttgart/Germany

Re: Adapter M52x075 -> M42x1

Post by lothman »

rjlittlefield wrote:Relevant?

https://www.ebay.com/itm/M42-x1-to-M52- ... 2624705596
--Rik
Thanks Rik, that is exactly what I was searching for. I used "M42x1" without a blank, may be that's the reason why I found nothing.
ChrisR wrote:They do exist, as step up rings:
http://www.ebay.co.uk/itm/1-one-Step-Up ... SwiVhZvVyc
Chris I'm not sure if this 42x1 or the usual filter thread M42x0.75

RobertOToole wrote: Hi Lothman,

Not sure if this would help but Raf camera made these for me for the same purpose, but to mount a tube lens! I use the same type of adapter now and they are very useful to have.

Robert
Thanks Robert, I do not need the length but otherwise this would have been a solution.

Post Reply Previous topicNext topic