Preventing Reflections With Black 2.0 Matte Paint

A forum to ask questions, post setups, and generally discuss anything having to do with photomacrography and photomicroscopy.

Moderators: rjlittlefield, ChrisR, Chris S., Pau

lonepal
Posts: 322
Joined: Sat Jan 28, 2017 12:26 pm
Location: Turkey

Preventing Reflections With Black 2.0 Matte Paint

Post by lonepal »

Hi;

I purchased a 150ml bottle of Black 2.0 which was sold by culturehustle to try if I can reduce or prevent the flaring on my extension tubes or metal parts.

https://culturehustle.com/products/blac ... t-material

Results;

Before;

Image

Image

After applying 1 layer of Black 2.0 with a basic brush;

Image

Image

As you can see on photos the flaring completely disappeared.
You can see some fibres of my brush on the coating, you should use a good quality brush to prevent this.

Long story short Black 2.0 matte paint by culturehustle is very useful for preventing flares on tubes, bellows and all other shiny thinhs that we use for macro photography, I recommend it.

If you have any questions please do not hesitate to ask.
Thanks.
Regards.
Omer

Stevie
Posts: 95
Joined: Sat Dec 27, 2008 9:17 am
Location: Belgium
Contact:

Post by Stevie »

Not too bad .
We are waiting for vanta black to become available . ;)

lonepal
Posts: 322
Joined: Sat Jan 28, 2017 12:26 pm
Location: Turkey

Post by lonepal »

Stevie wrote:Not too bad .
We are waiting for vanta black to become available . ;)
Don't hold your breath :lol:
Regards.
Omer

Post Reply Previous topicNext topic