Do anyone know the name of part which holding leds on the

A forum to ask questions, post setups, and generally discuss anything having to do with photomacrography and photomicroscopy.

Moderators: rjlittlefield, ChrisR, Chris S., Pau

leekekhuan
Posts: 74
Joined: Thu May 21, 2015 7:38 am
Location: Singapore

Do anyone know the name of part which holding leds on the

Post by leekekhuan »

Hi everyone,

I came across this setup where this gentleman had mounted leds on flex arm with help of small holders (as seen in this picture https://www.flickr.com/photos/100741226 ... datetaken/).

Do anyone knows what these holders call?

He was kind enough to gave me links of leds and flex arm

http://www.ebay.de/itm/10x-12V-LED-Modu ... SwWf9Zn6Nx

http://www.ebay.de/itm/Manfrotto-237-Fl ... Sw7ehXSIwL


Would appreciate if anyone knows what that call to hold leds to flex arm.

Regards,

LEE.

enricosavazzi
Posts: 1474
Joined: Sat Nov 21, 2009 2:41 pm
Location: Västerås, Sweden
Contact:

Post by enricosavazzi »

I don't recognize these parts, but the person who built this setup is the best qualified to answer your question.

It is possible, however, that these parts are 3D-printed and therefore not available for sale as a commercial product. This could explain why the builder of the setup did not give you information on the holders, only about the commercially available parts.
--ES

Post Reply Previous topicNext topic