www.photomacrography.net :: View topic - Using the NEO II RotoLight as a Microscope stage & flash
www.photomacrography.net Forum Index
An online community dedicated to the practices of photomacrography, close-up and macro photography, and photomicrography.
Photomacrography Front Page Amateurmicrography Front Page
Old Forums/Galleries
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
Using the NEO II RotoLight as a Microscope stage & flash

 
Post new topic   Reply to topic    www.photomacrography.net Forum Index -> Macro and Micro Technique and Technical Discussions
View previous topic :: View next topic  
Author Message
ghostcrab



Joined: 19 Jul 2016
Posts: 6
Location: New York, US

PostPosted: Mon Jun 18, 2018 12:51 pm    Post subject: Using the NEO II RotoLight as a Microscope stage & flash Reply with quote

During the past 6 months, I’ve incorporated the Neo II RotoLight into my micro stacking of flower parts. Due to it’s high speed sync flash with zero recycle time coupled with it’s continuous LED light (for precision focus) optional battery power or the included universal power adapter I’ve been able to work in studio or other locations.

The set-up that works for me: The optional barn doors and Chimera Soft-box, opaque white diffuser or sometimes tracing paper to support a microscope slide or bare specimen, a pc flash cord connects to my DSLR from the Rotolight. An optional Elinchrom ‘Skyport’ is available to adjust the strength of the LED or work directly off the hot shoe to have total remote control over the Neo II. Not really necessary in the study with the supplied universal power adapter but could be of use in the field.

I’ve attached a series of JPG’s of the set-up I use most frequently.



Back to top
View user's profile Send private message
Lou Jost



Joined: 04 Sep 2015
Posts: 2356
Location: Ecuador

PostPosted: Mon Jun 18, 2018 1:12 pm    Post subject: Reply with quote

Thanks for showing us that. I'm curious why you don't mount the lens on the rail, instead of the camera. It looks like your setup provides a lever for environmental vibrations.
_________________
Lou Jost
www.ecomingafoundation.wordpress.com
www.loujost.com
Back to top
View user's profile Send private message Visit poster's website
ghostcrab



Joined: 19 Jul 2016
Posts: 6
Location: New York, US

PostPosted: Mon Jun 18, 2018 1:36 pm    Post subject: Reply with quote

Since stackShot is setup for landscape mode where I usually use it with other lenses and the lens foot is portrait I find that it works just fine in the vertical, horizontal would be another story. I'm not having any issues with this even in burst mode. I'm also fortunate that my setup is on a very solid concrete floor, but it's a very good point that you brought up and if I go to a higher power objective, I'm pretty sure I'll be rotating the mount to accommodate the lens foot.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.photomacrography.net Forum Index -> Macro and Micro Technique and Technical Discussions All times are GMT - 7 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group