Adapter M52x075 -> M42x1
Moderators: rjlittlefield, ChrisR, Chris S., Pau
Adapter M52x075 -> M42x1
Is there an adapter available adapting a 52mm filter to M42 thread?
thanks but that is a reverse adapter, I would need an additional female female 52 tube in order to screw in a 52 filterlonepal wrote:https://www.ebay.com/itm/Reversing-Ring ... SwGYVW-8Ch
-
- Posts: 2627
- Joined: Thu Jan 17, 2013 9:34 pm
- Location: United States
- Contact:
Re: Adapter M52x075 -> M42x1
Hi Lothman,lothman wrote:Is there an adapter available adapting a 52mm filter to M42 thread?
Not sure if this would help but Raf camera made these for me for the same purpose, but to mount a tube lens! I use the same type of adapter now and they are very useful to have.
(There is a typo in the listing, the thread is M52 x 0.75.)
Robert
- rjlittlefield
- Site Admin
- Posts: 23561
- Joined: Tue Aug 01, 2006 8:34 am
- Location: Richland, Washington State, USA
- Contact:
Re: Adapter M52x075 -> M42x1
Relevant?lothman wrote:Is there an adapter available adapting a 52mm filter to M42 thread?
https://www.ebay.com/itm/M42-x1-to-M52- ... 2624705596
Also https://www.amazon.com/Gadget-Place-42m ... B01F6XZ7F8, though the last time I ordered one of those, the machining was not so good -- right pitch but depth visibly off.
--Rik
Re: Adapter M52x075 -> M42x1
Thanks Rik, that is exactly what I was searching for. I used "M42x1" without a blank, may be that's the reason why I found nothing.
Chris I'm not sure if this 42x1 or the usual filter thread M42x0.75ChrisR wrote:They do exist, as step up rings:
http://www.ebay.co.uk/itm/1-one-Step-Up ... SwiVhZvVyc
Thanks Robert, I do not need the length but otherwise this would have been a solution.RobertOToole wrote: Hi Lothman,
Not sure if this would help but Raf camera made these for me for the same purpose, but to mount a tube lens! I use the same type of adapter now and they are very useful to have.
Robert