| View previous topic :: View next topic |
| Author |
Message |
sushidelic
Joined: 10 Jun 2016
Posts: 199
|
 Posted: Mon Nov 13, 2017 8:24 am Post subject: |
 |
|
Hello Mike,
I just swapped the two images in Photoshop, so that each eye gets the corresponding perspective when looking at it crosseyed (and I reduced the black space around a bit). The way it was set up before was for "parallel" stereo. No need to go back to Zerene in a case like this 
Best regards,
Michael |
|
| Back to top |
|
 |
Troels
Joined: 15 Feb 2016
Posts: 331
Location: Denmark, Engesvang
|
| Posted: Mon Nov 13, 2017 1:01 pm Post subject: |
|
|
Wonderful!
It looks like a Scutigera
Here is website with a short explanation on how to see
cross eyed stereo
There are many other sites with good exersices.
Most people can learn it with a little training.
A few will never learn.
My own supplement to the explanations is: It is easiest to start with narrow pictures (portrait orientation).
It is also easier, if there is a distinct border between the two pictures.
I always add a colored line between them if the background is uniformed colored.
_________________
Troels Holm, biologist (retired), environmentalist, amateur photographer.
Visit my Flickr albums |
|
| Back to top |
|
|
rjlittlefield
Site Admin
Joined: 01 Aug 2006
Posts: 18912
Location: Richland, Washington State, USA
|
| Posted: Mon Nov 13, 2017 1:19 pm Post subject: |
|
|
| mawyatt wrote: | | So what do you do with this cross-eyed image now? |
You train your eyes to fuse the two images, while maintaining focus, and ignoring the rest of the world which is not fused.
Fusing the two images requires crossing your eyes so the right eye sees the left-side image, and vice versa.
Google cross eyed stereo viewing for an assortment of hints.
Learning to see crossed-eye stereo is a non-trivial educational experience that can produce significant eyestrain in the first attempts.
Some people never get the crossed eye stuff to work. For them I recommend using a parallel layout, with a mirror-based viewing aid ("stereoscope"), such as https://www.berezin.com/3d/pocket_3dvu.htm , to handle the fusion. When the viewing aid is properly adjusted, the human viewer's eyes don't have to do anything different from normal reading.
--Rik |
|
| Back to top |
|
|
rjlittlefield
Site Admin
Joined: 01 Aug 2006
Posts: 18912
Location: Richland, Washington State, USA
|
| Posted: Mon Nov 13, 2017 1:23 pm Post subject: |
|
|
| Troels wrote: | Here is website with a short explanation on how to see
cross eyed stereo |
Ironically, the two gray-scale images side-by-side at the top of that page are not stereo. They are just two copies of the same image, so fusing them just produces another flat image. The color images at the bottom of the page are stereo; fusing those produces good depth.
--Rik |
|
| Back to top |
|
|
mawyatt
Joined: 22 Aug 2013
Posts: 1431
Location: Clearwater
|
| Posted: Mon Nov 13, 2017 2:22 pm Post subject: |
|
|
Troels, Rik, Sushidelic,
Ok I finally get it!! That's pretty cool, looks like a hologram. Thanks for enlightening me!!
Sorry for being such a dunce 
Best,
Mike |
|
| Back to top |
|
|
Harald
Joined: 13 May 2011
Posts: 430
Location: Steinberg, Norway
|
| Posted: Thu Nov 30, 2017 2:38 pm Post subject: |
|
|
Hi there Mike,
Just out of sheer curiosity, how do you open up a chip like that ??
A lot of patience and a good cutting disc on a Dremel....?
I would love to do some chip images, you have really given me the inspiration 
_________________
Kind Regards
Harald
Lier Fotoklubb / NSFF
AFIAP / CPS
BGF / GMV
http://www.500px.com/blender11 |
|
| Back to top |
|
|
mawyatt
Joined: 22 Aug 2013
Posts: 1431
Location: Clearwater
|
| Posted: Thu Nov 30, 2017 5:36 pm Post subject: |
|
|
Hi Harold,
This is a circuit/chip design that I created and patented, so we had these chips packaged up by a speciality house in QFN packages with the lids just glued on. You can see some of the glue residue on the top of the package. This was done so we could test out the concept, so somewhat of an experimental chip. The lids were removed with just a Exacto blade.
Standard production chips are extremely difficult to get into. I think Mike (Olympusman) on here uses a Nitric acid (maybe H2SO4 also) heated fog to eat away the package but the leave the chip intact. He's got this down and has produced some stunning images of production chips that were "exposed" with this method.
Best,
Mike |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
