Interesting listing and good starting price on ebay (I'm not related) .
VEXTRA PK566H & Del-Tron LRS3-1 Linear Stage Axis Actuator
Motor has dual shaft and 0.72 degree step. Good material for the horizontal setup .
VEXTRA PK566H & Del-Tron LRS3-1 Linear Stage Axis Actuat
Moderators: rjlittlefield, ChrisR, Chris S., Pau
Hi saul,
I found this linear stage;
https://www.ebay.com/itm/1pcs-PG513L-Su ... 1438.l2649
I think motors are same type. I was actually thinking to gettting it, but motors are 5 phase and i dont know how i can control them. Maybe i can change nema 11 motor instead of vextra, (i hope dimensions are same). Thus i can control the stage with wemacro controller...
vextra motor has 0.72 degree step angle, nema 11 has 1.8...
5 phase more accurate and less vibration, i saw on internet...
I have to use microstep driver (8-16-32 even 64 microsteps)
You have really big experience about it, can you give me good advise?
Thank you
Best Regards
I found this linear stage;
https://www.ebay.com/itm/1pcs-PG513L-Su ... 1438.l2649
I think motors are same type. I was actually thinking to gettting it, but motors are 5 phase and i dont know how i can control them. Maybe i can change nema 11 motor instead of vextra, (i hope dimensions are same). Thus i can control the stage with wemacro controller...
vextra motor has 0.72 degree step angle, nema 11 has 1.8...
5 phase more accurate and less vibration, i saw on internet...
I have to use microstep driver (8-16-32 even 64 microsteps)
You have really big experience about it, can you give me good advise?
Thank you
Best Regards
Samil POLAT
Flickr
Flickr
Hi Samil,
There are some possible connection conversions from 5 to 4 wires, but I would contact William from WeMacro, he knows better internals of his design , can it be done. Worst case scenario - you can use 4 wire stepper with some simple 3d printed adapter (or something simpler), I done that in my Del-Tron setup.aspolat wrote:... i can control the stage with wemacro controller...
If I remember correctly, WeMacro has up to 32. Looking at the rail specs, you should be OK for 50x. I'm not big fan of the horizontal setup (using in the field mostly or for some big specimens which I cannot fit/position on the my vertical setup)... have to use microstep driver (8-16-32 even 64 microsteps)...
It is not true My experience is based on others experience/almighty Google/trial&error...You have really big experience about it ...
Saul
μ-stuff
μ-stuff
Hello again Saul,
Thank you for quick and comprehensive reply, appreciated.
I looked some CNC forum today, and i read something about vexta motors. They are 5 phase motors. You need special drivers for drive 5 phase motors, and they are very different then 2 phase motors.
Maybe we can control unipolar stepper( 5-6 wires and two phases) motor with some basic microchip as like L298N H Bridge. Even if we can modify wemacro controller for drive it.
But, I don't think so wemacro controller can drive 5 phase vexta motor. Completelly different system.
I think best idea is replace the vexta motor with NEMA 11 200 step/rev. (i guess dimension is almost same) standart 2 phase 4 wire motor as like your Del-TRON design. Thus easly can control with wemacro controller. As like you said
And i agree with you, the best option for 20X upper magnification is vertical setup. But i am so mobile and i could have not set yet.
Thank you again
Best Regards...
Thank you for quick and comprehensive reply, appreciated.
I looked some CNC forum today, and i read something about vexta motors. They are 5 phase motors. You need special drivers for drive 5 phase motors, and they are very different then 2 phase motors.
Maybe we can control unipolar stepper( 5-6 wires and two phases) motor with some basic microchip as like L298N H Bridge. Even if we can modify wemacro controller for drive it.
But, I don't think so wemacro controller can drive 5 phase vexta motor. Completelly different system.
I think best idea is replace the vexta motor with NEMA 11 200 step/rev. (i guess dimension is almost same) standart 2 phase 4 wire motor as like your Del-TRON design. Thus easly can control with wemacro controller. As like you said
And i agree with you, the best option for 20X upper magnification is vertical setup. But i am so mobile and i could have not set yet.
Thank you again
Best Regards...
Samil POLAT
Flickr
Flickr