Binocular for Mitutoyo FS-60 trinocular head. Perhaps fits also FS-70 Mitutoyo microscopes but I am not certain. The complete head mounted on the microscope looks like figure 2 at
https://savazzi.net/photography/mitutoyo-fs-60.htm . 80€ for the binocular part only, as shown in the above picture
A third-party camera tube for the FS-60 photo port at the top of the trinocular head, 106 mm long, a 25 mm eyepiece barrel mounts at the top (not included). 40€
I likely have also the remaining part with beamsplitter and prisms to make a complete trinocular head for the FS-60, contact me if you need to buy this additional part (quite heavy).
Binocular for Olympus BX 50/60 and AX 70 ultra-wide heads, for example U-SWTR-2. Does not fit ordinary heads. The tube lens of SW heads also is a special type in order to cover the field of view of 30 mm super-wide eyepieces like the SWH10x-H/26.5. These eyepieces are equipped with a pin to prevent rotation. The eyepiece ports of the binocular have notches for these pins. 100€
** Sold ** Pair of Nikon 10x 30 mm objectives. No further information on the barrels. They are not "bumped", the rubber eyeguards are a little deformed because of storage. I used these eyepieces on a Zeiss stereomicroscope where they worked well. They might originally come from a medical stereomicroscope/operating microscope. 100€
** Sold ** Wild/Leitz 0,32x lens from an M420 photomacroscope camera adapter, 30€
** Sold ** Table and micrometric stage from a Leitz microscope, no information on the stage, 50€
** Sold ** Very large (21 x 15 cm) table and micrometric stage from a Leitz Aristophot, micrometric movement range approx. 8 x 5 cm, 100 €
An unusual tilt stage, diameter of the round platform is 83 mm. Apparently designed to sit on a microscope stage in place of a 78 x 40 mm slide. Can only tilt in X and Y by a few degrees. 30€
Large Carl Zeiss tilt stage for photomacroscope or stereomicroscope (13.5 cm diameter). Must replace a 77.5-78 mm diameter glass plate on the base of the microscope. One of the two rings is an adapter I made for fitting in place of an 85.5 mm glass plate. You cannot just place it on a flat surface, because in this case it can tilt only a little. Has a center glass window of 30 mm for transmitted illumination. 80€
LM-Scope digital camera adapter. Replaces a 10x eyepiece, screws into the 28 mm filter mount of the camera lens. On most cameras you need to zoom to maximum in order to avoid vignetting. 30€
Carl Zeiss Jena PK 10x eyepiece, works well for photomicrography in an afocal setup with finite (160 mm TL) Zeiss objectives, 23 mm barrel diameter. 30€
** Sold ** Pair of Nikon CFWN 10x eyepieces, barrel diameter 23 mm. Both have diopter adjustment but no diopter scale. One of them has a cross reticle for photomicrography. 80€
Olympus OM focusing rack, it has the same nylon inserts as the Olympus OM bellows (quite similar to Nikon bellows), so you should not use it vertical with a heavy camera and lens (overtightening to prevent creep shortens the life of the nylon inserts), 100€
** Sold ** Nikon fine + coarse focusing rack, a type often used by PM.net members. I replaced the original axle and plastic gear with a CNC-machined steel part separately purchased on eBay, 150€
A larger Nikon fine + coarse focus rack, contains weight-counterbalance spring, I removed one knob to inspect the gears (I don't see any cracks) and to plan for motorizing the rack, but never got around to it. I will either put back the fine focus knob or include all parts, depending on how you wish. 175€
Carl Zeiss photo tube for Universal and Photomicroscope, attaches at the top of trinocular head, extends for focus calibration, photo eyepiece not included, 80€
A set of 8 Carl Zeiss 32 mm microscope filters, unidentified, different types and thickness (one of the very dark ones is deep-blue, the other deep-red), 50€
** Sold ** Olympus rings (larger diameter) for BX universal condensers: one U-DFA darkfield adapter apparently never unpacked, one UDP-40 DIC prism in pristine condition, still has the protective plastic foil on the ring, both for 150€
** Sold ** I also have one Olympus UDP-20 DIC prism, large size, for BX universal condensers in pristine condition, 100€
