Olympus 60x and 20 x Water Immersion Objectives

Interested in used equipment to buy, sell, or trade? Post here to find other members with matching needs. Personal equipment only, no dealers please.

Moderators: rjlittlefield, ChrisR, Chris S., Pau

jnh
Posts: 160
Joined: Mon Apr 27, 2015 7:34 am
Location: US East Coast

Olympus 60x and 20 x Water Immersion Objectives

Post by jnh »

Olympus UPlanSApo 60x/1.2 W ∞/0.13 - 0.21/FN26.5 (UIS2 UPLANSAOP60XW) (SOLD)
Olympus UApo/340 20x/0.7 W ∞/0.17

Both objectives were mounted in custom-machined aluminum pots with with a collar that allows to supply and drain water, which are included. The collar for the 60x screws onto the top, whereas the one for the 20x is held in place by a rubber gasket.
Objectives are in good condition and work well. More and higher res images upon request.

$2400 for the 60x and $1100 for the 20x. Shipping will be included.
PXL_20221204_153354384_s.jpg
PXL_20221204_153133805_s.jpg
Last edited by jnh on Thu Jan 19, 2023 5:59 pm, edited 1 time in total.

Macro_Cosmos
Posts: 1511
Joined: Mon Jan 15, 2018 9:23 pm
Contact:

Re: Olympus 60x and 20 x Water Immersion Objectives

Post by Macro_Cosmos »

That 20x is eyewatering, unfortunately, it is out of reach for me at the moment. The objective not being UIS2 is a bit annoying as well. :oops:
Out of curiosity, I would like to see a sample image of a flat surface, like a wafer piece, just to see how bad the distortion is. Would that be possible?

jnh
Posts: 160
Joined: Mon Apr 27, 2015 7:34 am
Location: US East Coast

Re: Olympus 60x and 20 x Water Immersion Objectives

Post by jnh »

PM sent

Post Reply Previous topicNext topic