NEWPORT M-481-A Metric Rotation Stage in new condition

Interested in used equipment to buy, sell, or trade? Post here to find other members with matching needs. Personal equipment only, no dealers please.

Moderators: Pau, rjlittlefield, ChrisR, Chris S.

typestar
Posts: 192
Joined: Sat Dec 12, 2009 1:45 am
Location: Austria

NEWPORT M-481-A Metric Rotation Stage in new condition

Post by typestar »

I offer a like NEW NEWPORT M-481-A Metric Rotation Stage in exzellent new condition

Retail new price in Germany 396 EUR


The M-481-A Metric Rotation Stage is ideal for fine 5° tuning the angular orientation of any component after rotating it to an approximate angle.
An inner stage rotates 360° in a precision bored bushing that locks with a side mounted thumbscrew.
The outer stage is a high resolution, tangentially driven design.
Scale markings indicating every degree and a vernier with 5 arc min markings are engraved on the side of the stage.
The 481-A is micrometer driven and attaches to tables and breadboards via clearance slots in the base, and to posts using one of two tapped holes located in the side of the stage.

Specs:

Coarse Travel: 360°
Fine Travel: 5°
Diameter: 73.2 mm
Load Capacity: 178 N
Sensitivity: 30 arc sec
Thread Type: M4 and M6
Optic Diameter: 25.4 mm
Clear Aperture: 19.1 mm
Backlash: Negligible
Graduations: 1°
Vernier: 5 arc min
Maximum Drive Torque: 0.9 Nm
Weight: 0.36 kg
Included Actuators: 40 TPI Micrometer
.........

Image


I ask 135 EUR + shipping + paypal fees
Please send me a PM if you are interested

Post Reply Previous topicNext topic