FS: Custom tripod-adapter for Nikon Printing Nikkor 105 mm

Interested in used equipment to buy, sell, or trade? Post here to find other members with matching needs. Personal equipment only, no dealers please.

Moderators: Pau, rjlittlefield, ChrisR, Chris S.

typestar
Posts: 197
Joined: Sat Dec 12, 2009 1:45 am
Location: Austria

FS: Custom tripod-adapter for Nikon Printing Nikkor 105 mm

Post by typestar »

For all of the appreciated Printing-Nikkor users here:

I have to offer a custom-made tripod-adapter /lens collar for the Printing-Nikkor 2.8/105 mm (A-version); real massive black anodized aluminum with fitting threads and tripod-ring; tripod ring can be unmounted;
with the Nikon BR2A this can be directly mounted to Nikon bellows or could be extended with M52 rings instead.

please check the PDF description here:

http://bit.ly/Printing-Nikkor-Tripod-Lensadapter-custom

As commercial adapters with a lens collar are not available, I have made 2 of this adapters, made in Austria;
(one I have sold with a Printing Nikkor 105 mm f/2.8 A to our appreciated member Enrico; you can see the lens and adapter mounted here: http://www.savazzi.net/photography/prin ... 105mm.html

As to the specs, the adapter should also fit the Tochigi Nikon Rayfact 105 mm f/2.8.

As I have no PN anymore, I am asking 68.- EUR + best packed shipping from Austria (+ Paypal-fees).

Please send me a PM if you are interested

Thankyou for your interest, best wishes!


christian

Post Reply Previous topicNext topic