AO series 10 loose mirror

This area is for the discussion of what's new, what's on your mind, and general photographic topics. A place to meet, make comments on this site, and get the latest community news.

Moderators: rjlittlefield, ChrisR, Chris S., Pau

henryr
Posts: 94
Joined: Mon Aug 31, 2015 8:48 am
Location: Connecticut

AO series 10 loose mirror

Post by henryr »

Hi all,
I just received an American Optical XH10TU-LW. It is in great condition except for one problem. While unpacking it I heard a rattling sound and found that a mirror, that should be mounted on a 45 deg. bracket, was lose. My question is should I re-glue it to the bracket with super glue or some other adhesive. I also have two sided tape. The bracket is secured with three springs and screws so I realize I will have to re-align it. And the first pic shows a plug. What does it do and what is it supposed to be connected to?

Thanks,
henryr
Attachments
ao6.JPG
ao5.JPG
ao4.JPG
ao3.JPG
ao2.JPG
ao1.JPG

MarkSturtevant
Posts: 1942
Joined: Sat Nov 21, 2015 6:52 pm
Location: Michigan, U.S.A.
Contact:

Re: AO series 10 loose mirror

Post by MarkSturtevant »

I know nothing. I suppose the mirror is to direct light to the specimen? I can't tell where the light is from the pictures, but presumably its in the base...
I would not use superglue until you are absolutely certain exactly where and how to position it.
Mark Sturtevant
Dept. of Still Waters

Post Reply Previous topicNext topic