LED modeling light for speedlight

Have questions about the equipment used for macro- or micro- photography? Post those questions in this forum.

Moderators: rjlittlefield, ChrisR, Chris S., Pau

Saul
Posts: 1781
Joined: Mon Jan 31, 2011 11:59 am
Location: Naperville, IL USA
Contact:

LED modeling light for speedlight

Post by Saul »

I'm very happy with my FO LED light, but there are situations when I have to use the flash. Main problem - light modeling .

Possible solution (quick test setup), which worked great (except white balance, no surprise, new COB LED's are coming)
Initial positioning and light modeling is performed with LED's, stacking (with LED's up) - with flash.
Image
Image
Image
Saul
μ-stuff

ChrisR
Site Admin
Posts: 8668
Joined: Sat Mar 14, 2009 3:58 am
Location: Near London, UK

Post by ChrisR »

Splendid idea =D> :smt038
Chris R

soldevilla
Posts: 684
Joined: Thu Dec 16, 2010 2:49 pm
Location: Barcelona, more or less

Post by soldevilla »

When I used flashes, I attached the LED modeling light in front of the flash with a small Neodymium magnet glued to the front of the flash

Saul
Posts: 1781
Joined: Mon Jan 31, 2011 11:59 am
Location: Naperville, IL USA
Contact:

Post by Saul »

soldevilla wrote:When I used flashes, I attached the LED modeling light in front of the flash with a small Neodymium magnet glued to the front of the flash
Exactly :)
Got the needed parts already, but did not attached yet ... Will do with COB square LED ,which is still traveling from China
https://www.ebay.com/itm/94X50MM-Blue-D ... VbgSWGgwhg
Saul
μ-stuff

Post Reply Previous topicNext topic