My next buy , fitted to ANY camera
http://esciencenews.com/articles/2013/0 ... .dim.light

Thanks Rik !
i am fore ever hoping for a "JML clone " hidden somewhere

Can not find any ifo regarding magnification fl or aperture anywhere , could be an expensive paperweight...
http://www.recycledgoods.com/zoom.aspx?productID=34074

Mr.Stone wrote:

You haven't got the wrong end of the stick about this stacking business, have you?

Meaning?

Meaning that 40 microscopes piled on top of each other would be quite a stack !

Any olympus spares in the lot ?
I have a stripped fine focus gear on my focus block

White inside barrel ? edit light gray

Would flocking improve iq in this case ? i presume the lens extends to very close to the diopter , so maybe no large improvement ?

Very nice looking job! I would be interested in seeing the lcd screen pieces if you have pictures of them. Do you mean the raw material before glueing and lathing ? It is 10mm thick clear acrylic with the diffusion dots etched to one side ' i should have some cut off in the workshop and will post a...

The ring is spot glued to hold it in place so can not dismantle to take a pic
Hope the drawing would explain the shape
note that the reflector inside wall has been cut away to transmit more light inwards

Picked up an old Minicam ring lite from a boot sale recently...... inside was this beautifull large diameter "closed loop" zenon tube Ideal for using at close distance to the subject , an unbroken ring of light from a relatively large surface has less diffusion requirement than a short point source ...

Ditto ! Very striking image

They look a lot like the little "drop in" lense used in a micro film reader (microfiche)

I recently purchased a olympus cx31 microscope to convert into a compact vertical rig using the stage and 4x and 10x objectives only The remaining two are offered for sale All offers will be considered and answered Proceeds to go towards purchasing my Zerene Licence :D Will leave the add open for se...

Single shots of a page of small print ( magazine) Objective mounted onto a 150mm super takumar prime Camera Canon 50D , lighting 540 EZ manual @128th power through 2 layers of lcd "micro lens "diffuser Focusing is via olympus cx 31 subject stage no post exept slight curves in ps Does it look accepta...

I have a full set of infinity objectives on their way in the post It is the newer infinity types from an Olympus CX31 scope and are all marked Plan -C Nowhere in the Olympus literature is there any mention of what the C in Plan -C means I cannot even find the objectives listed by Olympus here http:/...

I am thinking , cube with bottom ,left and right sides made from reflector material camera side reflective material with hole drilled for objective ,back of cube any background material and finally top of cube diffused accrylic to shoot the flash through
don't ask for a ray diagram!