Fly 3x2xZ

Starting out in microscopy? Post images and ask questions relating to the microscope and get answers from our more advanced users on the subject.

Moderators: Chris S., Pau, rjlittlefield, ChrisR

Post Reply
Luisifer
Posts: 84
Joined: Wed Sep 05, 2018 1:40 am
Location: Czech Republic
Contact:

Fly 3x2xZ

Post by Luisifer »

One stack and stitch test. No any big game, so w/o local postprocess or retouching or substacking, etc...

Six stacks, about 1300 frames. (ZS for stacking, APG for stitching)

https://12in.cz/temp/Fly.jpg

Image

cube-tube
Posts: 107
Joined: Tue Oct 10, 2017 7:50 am
Location: Durham, NC

Post by cube-tube »

The stitching seems to be working very well. It's tough to find boundaries. How much overlap between frames?

Luisifer
Posts: 84
Joined: Wed Sep 05, 2018 1:40 am
Location: Czech Republic
Contact:

Post by Luisifer »

They are quite visible on borders. The moves in X and Y were made by hand so it is quite not precise, but only approximate. Somewhere it is close to 50% of overlapping.

Another stack and stick moved approximate in X and Y axes:
https://12in.cz/temp/Test5150.jpg

5150 mean number of frames. It is 16 stacks in this test without any retouching or adjusting so there is a lot of mess, mistakes, etc. I am working on final result but it will take more time thanks to i will have to stitch it by hand (pano software stitch it with not apropriate linking). Already i have prepared clean 16 stacks for it....

Post Reply