Hello everybody,
This time I would like to present you the Raynox DCR-150 mounted with Harley clamps:
- distance between Raynox and microscope lens = 5,5cm
- distance between Raynox and camera sensor = 20cm (till 17cm)
BTW, SIGMA LSA on Harley looks like follows:
http://www.photomacrography.net/forum/v ... highlight=
BR, ADi
Raynox on Harley
Moderators: rjlittlefield, ChrisR, Chris S., Pau
Thanks for pointing me to those Harley clamps. I will order some of those. Does the flat face need some machining where they contact the arca clamp? They look like cast material without machining so they might wobble a little.
regards
Lothar
P.S. for tubes with smooth outer surface you could go for T2 Extension tubes and, convert them with a M42x1 -> M42x0.75 or use a T2-Adapter directly for camera connection.
Link to ebay auction for T2 extension tubes
regards
Lothar
P.S. for tubes with smooth outer surface you could go for T2 Extension tubes and, convert them with a M42x1 -> M42x0.75 or use a T2-Adapter directly for camera connection.
Link to ebay auction for T2 extension tubes