Hi.
Anyone here who use 1/2" or 1/3" camera?
I have some questions about small sensor cameras.
It's 1/2.3" 16MP USB camera and one and only tiny C-mount Moritex Schott 0.8X telecentric lens without extension rings or bellows. WD=65mm. Not stacked.
Just resized and sharpened due to camera ability to save frames only from mjpg stream. So on the screen i can see much crisp image than after save.
Small sensors
Moderators: rjlittlefield, ChrisR, Chris S., Pau
This is a really nice clean image. Very impressive.
I have used small 1/2.3" sensors with a microscope objective to get lots of pixels to cover a small FOV; see
http://www.photomacrography.net/forum/v ... p?p=178204
I have used small 1/2.3" sensors with a microscope objective to get lots of pixels to cover a small FOV; see
http://www.photomacrography.net/forum/v ... p?p=178204
-
- Posts: 137
- Joined: Sun Jun 10, 2018 3:54 pm
- Location: Russia
Thanks, Lou!Lou Jost wrote:This is a really nice clean image. Very impressive.
I have used small 1/2.3" sensors with a microscope objective to get lots of pixels to cover a small FOV; see
http://www.photomacrography.net/forum/v ... p?p=178204
I'm trying to find the way for live video with big DoF, so i'm not interesting for stacking.
Here's my last attempt with two telecentric lenses. WD=170mm and round glass size on the chip is 7mm diameter.
Not cropped, just cut at horizontal size to achieve board rules, one shot and chip is about 45 degree to lens.