Had an old PCB (From a wireless phone) took a saw to it, rough polished it on emery paper, then a gentle polish with 10um and 2 um diamond paste.
This is a small stack and stitch taken with epi-DF 5x NeoDplan obj
And this is from same area but BF 20x obj (24 image stack)
Could likely polish it a bit finer to remove the polishing marks on the copper and solder.
PCB Cross Section
Moderators: rjlittlefield, ChrisR, Chris S., Pau
-
- Posts: 73
- Joined: Tue Oct 18, 2016 2:40 pm
- Location: Canada
- Contact: