www.photomacrography.net :: View topic - Another Mitutoyo 10x objective user
www.photomacrography.net Forum Index
An online community dedicated to the practices of photomacrography, close-up and macro photography, and photomicrography.
Photomacrography Front Page Amateurmicrography Front Page
Old Forums/Galleries
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
Another Mitutoyo 10x objective user

 
Post new topic   Reply to topic    www.photomacrography.net Forum Index -> Equipment Discussions
View previous topic :: View next topic  
Author Message
Kieran Jones



Joined: 29 Jul 2013
Posts: 74
Location: Southeastern Ontario, Canada

PostPosted: Tue Oct 22, 2013 12:44 pm    Post subject: Another Mitutoyo 10x objective user Reply with quote

I thought I'd post the following pictures to add to this forum's information about using the Mitutoyo 10x infinity-corrected microscope objective for macro work.

I purchased this objective new from Edmund Optics. It has a published NA of 0.28 and a working distance of 33.5 mm.

I've mounted it via a flat adapter to a Nikon 180mm f/2.8 fixed focal-length telephoto lens, giving a magnification at the sensor of 9x.

The camera used is a Nikon D700 having a full-frame, 4256 x 2832 pixel 12MP sensor.

A Stackshot rail was used to generate image stacks and Zerene Stacker was then used to merge them down to single images.

Deficiencies in the images are certainly due to my own inexperience and not the objective!

Regards,

Kieran Jones










Back to top
View user's profile Send private message Visit poster's website
g4lab



Joined: 23 May 2008
Posts: 1424

PostPosted: Tue Oct 22, 2013 3:01 pm    Post subject: Reply with quote

Looks pretty good to me and you even remembered to put a size bar in the image.
Back to top
View user's profile Send private message
Kieran Jones



Joined: 29 Jul 2013
Posts: 74
Location: Southeastern Ontario, Canada

PostPosted: Wed Oct 23, 2013 8:20 am    Post subject: Scale bars Reply with quote

Thanks for the feedback, g4lab.

To make the scale bars I used the method described by Rik Littlefield in this post.
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    www.photomacrography.net Forum Index -> Equipment Discussions All times are GMT - 7 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group