Reversing adapters for EL-Nikkor

Have questions about the equipment used for macro- or micro- photography? Post those questions in this forum.

Moderators: rjlittlefield, ChrisR, Chris S., Pau

rovebeetle
Posts: 308
Joined: Thu May 22, 2008 4:21 am
Location: Vienna, Austria
Contact:

Reversing adapters for EL-Nikkor

Post by rovebeetle »

What kind of adaptors or combinations are you using to reverse mount an EL-Nikkor? I guess there is no one-piece solution from the 40.5 filter thread to F-mount, right?

Cheers
Harry

NikonUser
Posts: 2693
Joined: Thu Sep 04, 2008 2:03 am
Location: southern New Brunswick, Canada

Post by NikonUser »

You need a Nikon BR2A (or equivalent) and then just 1 ring.

I have bought several of these from Heavystar, excellent!

HERE

$7.21 Canadian
NU.
student of entomology
Quote – Holmes on ‘Entomology’
” I suppose you are an entomologist ? “
” Not quite so ambitious as that, sir. I should like to put my eyes on the individual entitled to that name.
No man can be truly called an entomologist,
sir; the subject is too vast for any single human intelligence to grasp.”
Oliver Wendell Holmes, Sr
The Poet at the Breakfast Table.

Nikon camera, lenses and objectives
Olympus microscope and objectives

rovebeetle
Posts: 308
Joined: Thu May 22, 2008 4:21 am
Location: Vienna, Austria
Contact:

Post by rovebeetle »

Thanks NU, great resource.
Of course, I meant 40.5 to BR-2A (52mm), which you correctly assumed. However, I obviously head my thoughts elsewhere when I wrote this. The situation is not that easy because if I want to use it on my bellows (Novoflex Balpro) I would need a male 40.5 to male M39 adapter. Or, 40.5 to Leica R would also be possible. Otherwise I would have to buy the Nikon plate for the objektive end of the bellows.
Anyway, I will find a solution :)

Cheers
Harry

Planapo
Posts: 1583
Joined: Tue Nov 07, 2006 2:33 am
Location: Germany, in the United States of Europe

Post by Planapo »

Harry,

if you can't find a M39 reversing adapter for your bellows,

a M39 to M42x1 Lens mount Step Up Ring adapter, e. g. ebay # 230348828723

and a M42x1 to 52 mm reversing adapter, e. g. ebay # 120409255160

would give you a M39 reversing adapter to 52 mm, and in combination with the filter stepping ring NU linked, you're done.

--Betty

rovebeetle
Posts: 308
Joined: Thu May 22, 2008 4:21 am
Location: Vienna, Austria
Contact:

Post by rovebeetle »

Thanks Betty, that shortens my searching time which is great because I am very busy.
Of, course I could also buy the LEINIK adapter in case I want to attach other Nikon lenses to the bellows but I was looking for a cheap solution and the combo you pointed out will work well.

Cheers
Harry

dmillard
Posts: 639
Joined: Tue Oct 24, 2006 7:37 pm
Location: Austin, Texas

Post by dmillard »

Hello Harry -

I know this is a little late, but I just read your post . . . You may want to keep your eyes open for a Nikon Reversing Adapter for their older 63mm f/3.5, 50mm f/2.8 enlarging lenses. It has a 40.5mm male to 39mm male thread. I bought one on eBay for less than $20 last year. There are currently two listed here: http://cgi.ebay.com/Nikon-40-5-Reversin ... 3ef38bd32d but at exorbitant prices.

David

Post Reply Previous topicNext topic