https://12in.cz/fotografie/obr/125_Kousnu-si
Agelena
I bite you
Moderators: rjlittlefield, ChrisR, Chris S., Pau
Re: I bite you
Third one is not a spider but beatle.
Carpophilus hemipterus (Linnaeus, 1758)
https://12in.cz/fotografie/obr/128__60_Lesknacek-fikovy
The simplest stack and stitch, two rows, first 199 frames and second 156 frames. But quite no simple stitching thanks to change in position of legs and antennae.
Carpophilus hemipterus (Linnaeus, 1758)
https://12in.cz/fotografie/obr/128__60_Lesknacek-fikovy
The simplest stack and stitch, two rows, first 199 frames and second 156 frames. But quite no simple stitching thanks to change in position of legs and antennae.
No, it is on second floor from planks and each bigger car cause vibrations or when i am not steady.
1000 steps per micron mean that i will use about 700 steps per second / between frames. I use permanent movement without stopping between each frame and i expect that more steps brings more fluence to movement than using less steps per second which are closer to move-stop-move-stop character.
(begin / end of movement can cause vibrations when momentum is changed)
1000 steps per micron mean that i will use about 700 steps per second / between frames. I use permanent movement without stopping between each frame and i expect that more steps brings more fluence to movement than using less steps per second which are closer to move-stop-move-stop character.
(begin / end of movement can cause vibrations when momentum is changed)
I started with micro only about a year before. :-)
(that's why i use not appropriate gear yet .... but some again and again redoing of eL aluminium profiles are the case too)
Tube lens is: EOS/M58 + 2x M58 telescopic (adjustable) tubes + reductions to reversed DCR-150 + M42 tube + reductions from M42 to M26.
(that's why i use not appropriate gear yet .... but some again and again redoing of eL aluminium profiles are the case too)
Tube lens is: EOS/M58 + 2x M58 telescopic (adjustable) tubes + reductions to reversed DCR-150 + M42 tube + reductions from M42 to M26.