Hi everyone,
I came across this setup where this gentleman had mounted leds on flex arm with help of small holders (as seen in this picture https://www.flickr.com/photos/100741226 ... datetaken/).
Do anyone knows what these holders call?
He was kind enough to gave me links of leds and flex arm
http://www.ebay.de/itm/10x-12V-LED-Modu ... SwWf9Zn6Nx
http://www.ebay.de/itm/Manfrotto-237-Fl ... Sw7ehXSIwL
Would appreciate if anyone knows what that call to hold leds to flex arm.
Regards,
LEE.
Do anyone know the name of part which holding leds on the
Moderators: rjlittlefield, ChrisR, Chris S., Pau
-
- Posts: 74
- Joined: Thu May 21, 2015 7:38 am
- Location: Singapore
- enricosavazzi
- Posts: 1478
- Joined: Sat Nov 21, 2009 2:41 pm
- Location: Västerås, Sweden
- Contact:
I don't recognize these parts, but the person who built this setup is the best qualified to answer your question.
It is possible, however, that these parts are 3D-printed and therefore not available for sale as a commercial product. This could explain why the builder of the setup did not give you information on the holders, only about the commercially available parts.
It is possible, however, that these parts are 3D-printed and therefore not available for sale as a commercial product. This could explain why the builder of the setup did not give you information on the holders, only about the commercially available parts.
--ES