Hello the forum.
I am trying to set up a Zeiss Jenamed 2 to do some phase contrast work.
It is an old microscope so parts are scarce. If I could find the dimensions I could possibly make the annuli.
I am looking for the dimensions of the 40x and 100x objective matching annuli.
If you do not have these annuli could you please place me in contact with someone who dose?
I am trying to avoid a buying an AmScope phase contrast machine.
Thanks for your time.
M
Wanted Zeiss Jenamed 2 phase contrast annuli dimensions
Moderators: rjlittlefield, ChrisR, Chris S., Pau
-
- Posts: 4
- Joined: Thu Jun 29, 2017 10:47 pm
-
- Posts: 1152
- Joined: Thu Mar 07, 2013 5:24 am
Hi M,
Do you have Ph or Phv objectives?
I don't have the dimensions of the phase rings but here are instructions for measuring the diameters: http://www.microscopy-uk.org.uk/mag/ind ... phase.html
Use the built-in Bertrand lens of your Jenamed2 to do the measurements.
Kind regards, Ichty
Do you have Ph or Phv objectives?
I don't have the dimensions of the phase rings but here are instructions for measuring the diameters: http://www.microscopy-uk.org.uk/mag/ind ... phase.html
Use the built-in Bertrand lens of your Jenamed2 to do the measurements.
Kind regards, Ichty