I just bought a second hand stereo microscope from a guy who inherited it from his father. I got it for 70 usd , and it seem a lot better build and with more features that the 60 - 100 euro range microscopes in stores.
I have some pictures of it here, in this google album
https://goo.gl/photos/v7qqg8tn8vhaW4gG6
It's got Wetzlar objectives that I hope and assume are good.
I have a few beginner problems with the microscope that I hope to get some help with.
I can't seem to move the stage up and down. The large knobs that I assumed would move it are very hard to move. If I apply some pressure, it gives, but the stage still does not move up and down.
The turret is also pretty hard to move.
Is this just because it is old, and needs some TLC? Am I doing something wrong? Can I do the required service myself?
Beginner question about microscope operation
Moderators: rjlittlefield, ChrisR, Chris S., Pau
Yes, these old instruments are usually more solid than modern inexpensive ones.
It isn't a stereo microscope, it's a binocular compound microscope: you look trough both eyes but the same image produced by the objective.
The problem can be hardened grease. To fix it completely the only way can be to dismount the mechanics to lube them, some thing very delicate, you can try heating it with a hair dryer and moving when hot, some times works, better dismount before the objectives if you apply heat to the turret.
It isn't a stereo microscope, it's a binocular compound microscope: you look trough both eyes but the same image produced by the objective.
The problem can be hardened grease. To fix it completely the only way can be to dismount the mechanics to lube them, some thing very delicate, you can try heating it with a hair dryer and moving when hot, some times works, better dismount before the objectives if you apply heat to the turret.
Pau
Thanks for clearing that upYes, these old instruments are usually more solid than modern inexpensive ones. It isn't a stereo microscope, it's a binocular compound microscope: you look trough both eyes but the same image produced by the objective.
I'm use to servicing gears and worms from telescopes mounts. The mechanics of the microscope looks to be the same, but smaller and more delicate as you say. I paid 60 USD for it, so not the end of the world If I screw something up....The problem can be hardened grease. To fix it completely the only way can be to dismount the mechanics to lube them, some thing very delicate, you can try heating it with a hair dryer and moving when hot, some times works, better dismount before the objectives if you apply heat to the turret.
- Charles Krebs
- Posts: 5865
- Joined: Tue Aug 01, 2006 8:02 pm
- Location: Issaquah, WA USA
- Contact:
Thanks for the help!One quick thought... try not to move such a "semi-frozen" or "frozen" component using the knobs until you are able to get it free in some manner. Unfortunately it is not uncommon to break or strip out a component if yo do so.
I am also interested in Astronomy and service old telescope mounts from time to time. My motto is "Don't do anything to the equipment, that you would not do to you girlfriend". :-)
I had do pick apart and reassemble it all to get to the frozen part. A good dash of WD-40 did the trick, and I now have a well functioning super microsope for a bargain :-)