FAQ: 3D models

[Saul]

14. LOMO UV filter stand/case/holder

Files:
https://www.thingiverse.com/thing:4318633

[Macro_Cosmos]

That's one elegant filter holder! I'd add some through-holes so they can be mounted onto optical boards and slots for magnets underneath. I like this idea. I'm gonna make one for the filters I use.

[Saul]

15. Darkfield Adapter for Whole Slide Imaging

Files (alpha version):
https://www.thingiverse.com/thing:4543961

Original post:
viewtopic.php?f=25&t=42071

[Saul]

Item #4 is removed from the thingiverse.

One ebay seller from Germany downloaded these files which were under non-commercial license (for personal use only) and started selling in his account
https://www.ebay.com/itm/323523667421

ALL my items on this FAQ post are for personal use only !

[genera]

Item #4 is removed from the thingiverse.

One ebay seller from Germany downloaded these files which were under non-commercial license (for personal use only) and started selling in his account
https://www.ebay.com/itm/323523667421

ALL my items on this FAQ post are for personal use only !

Saul, are you aware of the eBay VeRO program? They'll take down any offending listings.
https://pages.ebay.com/seller-center/li ... #m17-1-tb2

[Saul]

Item #4 is removed from the thingiverse.

One ebay seller from Germany downloaded these files which were under non-commercial license (for personal use only) and started selling in his account
https://www.ebay.com/itm/323523667421

ALL my items on this FAQ post are for personal use only !

Saul, are you aware of the eBay VeRO program? They'll take down any offending listings.
https://pages.ebay.com/seller-center/li ... #m17-1-tb2

Hi Gene,

Thank you for reminding me , totally forgot it !

[Saul]

16. HK KR20 Nema17 stepper adapter

Files:
https://www.thingiverse.com/thing:6614226

[Pau]

16. HK KR20 Nema17 stepper adapter

Files:
https://www.thingiverse.com/thing:6614226

This looks nice!
Have you tested it with a THK KR20 rail?
I just received the rail and would like to adapt a Wemacro motor

[Saul]

16. HK KR20 Nema17 stepper adapter

Files:
https://www.thingiverse.com/thing:6614226

This looks nice!
Have you tested it with a THK KR20 rail?
I just received the rail and would like to adapt a Wemacro motor

Hi Pau,
Yes:
viewtopic.php?p=297294#p297294
If you need an Andoer mounting plate adapter for the KR20, please let me know.

[mkbn]

Nema 14 stepper motor adapter for THK KR20 rail. Note: maximum shaft length is about 22mm as designed. M3 nut spacing is a bit tight, per my preference, but feel free to make it looser or please ask and I will republish the file with a looser nut spacing if anyone has issues with their printer. Tested and prints well with a good quality printer.

Will be live in 24 hours here:
https://www.thingiverse.com/thing:6650672

Get the STL now from here: https://hackittogether.com/nema14adpt.stl

License listed as creative commons, share alike with attribution, non-commercial (don't sell it pls).

[Leonardo]

Awesome thread, just be very careful to 3d printed parts that are very close to heat sources (ex. lights) because they can deteriorate and develop gases that can affect optics. Something similar happened to Swarovski when they moved from metal to soft-touch plastics for their spot scope.

[Saul]

17. Canon M6 MK2 SD Card Extension Cable Adapter

The open door tab on the Canon M6 Mark II enables camera power when the door is open, allowing the use of an SD card extension for focus stacking or time-lapse photography.
Insert a metal pin into the small opening at the base of the tab—either by gluing or heating—to reinforce the tab and make it stronger.

1.Attach the SD adapter casing with the short flathead 1/4-20 screw to the camera.
2.Slide in the adapter cable.
3.Slide in the tab part on the cable.
4.Insert the SD side into the camera.
5.Slide on the tab part on the back side of the SD insert.
6.Insert the battery or power supply.

Files:
https://www.thingiverse.com/thing:7056473


Original post:
viewtopic.php?f=25&t=48347