Comar MPlan 2.5/0.07 Query

Have questions about the equipment used for macro- or micro- photography? Post those questions in this forum.

Moderators: rjlittlefield, ChrisR, Chris S., Pau

ojd01
Posts: 49
Joined: Sun Nov 15, 2020 10:56 am
Location: Teesside, Middlesbrough, UK

Comar MPlan 2.5/0.07 Query

Post by ojd01 »

Hello everyone!

I received an Comar MPlan 2.5/0.07 - NCC corrected - 210mm tube - objective secondhand. (images attached)

https://www.photomacrography.net/forum/ ... ew&id=3246
https://www.photomacrography.net/forum/ ... ew&id=3245

The first images I have made are not too bad, but the sharpness is not there. I have almost nailed my 160mm setup, but since making the finite length longer to 210mm, I have struggled to get some decent sharpness. The objective also has "OFN 19" and claimed to be a "MTL" objective - assuming metallurgical.

Is there something I am doing wrong with the setup or is it just the objective quality? I have attached an example image (due to resizing it does not look as clear) but the points of focus are not that sharp.

https://www.photomacrography.net/forum/ ... ew&id=3244

Any advice would be gratefully appreciated :)

Kind Regards

Owen
Attachments
20210310_162611.jpg
20210310_162600.jpg
2021-03-11-10.39.39 ZS PMax-COMAR.jpg
Instagram: @ojd_photo

Post Reply Previous topicNext topic